好运11选5

Integrated pumping station
一体化泵站

Integrated pumping station

Company: Shandong Ruixin Environmental Protection Equipment Co., Ltd. Brief introduction: 1. Brief introduction of integrated pumping station Integrated sewage pumping station is composed of composite winding glass fiber reinforced plastic tank body, which includes water pumps, pipes, valves, ladders, maintenance platforms, etc. If required, a crushing grid can be added behind the water inlet pipe, and the cylinder is equipped with glass.
Consulting Hotline: 13356363553
product description
1.Introduction to integrated pumping station
The integrated sewage lifting pump station is mainly composed of a composite wound glass fiber reinforced plastic tank body, which includes water pumps, pipes, valves, ladders, maintenance platforms, etc. According to user needs, a crushing grille can be added after the water inlet pipe, A glass fiber reinforced plastic top cover is provided, which is a complete set of equipment that integrates all equipment and instruments. The schematic diagram is shown in Figure 1. therefore

It has the characteristics of small size, small footprint, safe use and easy installation.

2. Features of integrated sewage lift pumping station

(1) High security

The main body of the integrated pumping station is a composite wound glass fiber reinforced plastic cylinder, which has a strong anti-corrosion ability. The built-in submersible pump (optional stirring blade), automatic coupling device, guide rod, lifting chain, water outlet pipe, check valve, gate valve, water inlet and outlet pipe , Can realize a fully automatic unattended control system, the inlet of the gravity pipe network water inlet can be set according to user needs

Crushing type grille, the chip size of waste after cutting is 8mm, which is helpful for the fine grille in the later stage to lift. Almost all the equipment of the integrated sewage lifting pump station is equipped with spares, and the core components are imported products, so the safety is very high.

(2) Small footprint of integrated pumping station

The prefabricated pumping station system has high integration and small footprint.

(3) Easy to coordinate with the surrounding environment

The integrated sewage lifting pump station is buried under the ground, and the exposed surface is like an ordinary sewage inspection well, which can be well coordinated with the surrounding environment.
(4) Little impact on the surrounding environment

After the pump station is buried in the ground, it will not emit odor and has less impact on the environment. Reduce unnecessary troubles caused by environmental problems in the future.

(5) High degree of self-control

Built-in dedicated water pump controller shows the running status of the water pump and realizes real unattended operation. It can reduce the labor intensity of management personnel and realize the rational allocation of personnel.

(6) Simple construction and short construction cycle

The prefabricated integrated equipment is convenient for transportation and hoisting. As long as the excavation of the foundation pit is completed and the floor of the pump station is prefabricated, the installation can be completed within 1 week. Small construction volume and short installation period.

(7) Long service life

FRP material has strong resistance to chemical corrosion, and the pump station can be moved during use to be used again
Related Products